Capcem PLGF - Capcem PLGF

TekGrout

Anchoring Grouts Pumpable, Bulk Packaged

Capcem PLGF

Capcem PLGF

Description

Capcem PLGF is supplied in a 25kg lined, woven polypropylene bag. It is a single component powder that is mixed with water. The mixed grout is intended for placement through a suitable grout pump. 

Advantages

  • Cement based no resins or solvents.
  • Pump life of minimum 3 hours, mixing water at 25°C.
  • Pumpable up to 15 metres.
  • No shrinkage or bleed water.
  • No grout run-out.
  • High pH promotes absence of corrosion.

Mixing Instructions

One bag of Capcem PLGF is added to 10 litres of water or pro rata in a suitable mixing / pumping vessel and mixed thoroughly for 3 minutes. Water temperature should be between 20°C and 30°C preferably. 

The grout is then pumped into the drilled hole before or after installation of the anchor to give full column filling. Use the delivery line to fill from the back of the drilled hole forwards, or use an air-release bleed line system if filling from the front of the hole. 

Storage / Shelf Life 

Capcem PLGF has a shelf life of 12 months when stored unopened in dry conditions and out of direct sunlight to prevent degradation of packaging. 

Health and Safety 

Capcem PLGF is non-toxic but is alkaline in nature, gloves and eye protection should be worn. Splashes of grout to the skin or eyes should be washed off with clean water. In the event of prolonged irritation seek medical advice.  Refer to Material Safety Data Sheet. 

Technical Support  

We provide a technical advisory service by a team of specialists in the field. The service includes on site assistance and advice on evaluation trials and laboratory work. 

Downloads

Techdata

Request SDS for Your Region

Applicable for:

Coal Mining
Hard Rock Mining
Civil Construction
General Construction

Available regions

South Africa